AUDISHAKO 5.1 Channel Stereo Receivers Review: Who It Fits and Who Should Skip It

What stands out

• 180W RMS power output at 4Ω
• 5.1-channel speaker configuration
• Three microphone inputs with echo control
• Bluetooth, optical, and coaxial connectivity
• Separate volume controls for each channel

Who it fits

Key specs explained for this receiver

Channels: 5.1-channel

This configuration includes five full-range channels plus one low-frequency effects channel. You connect two front speakers, two surround speakers, one center speaker, and one subwoofer. This setup creates a surround sound field for movies. It suits buyers who want immersive audio without complex AV receivers. Compare this to stereo receivers that only offer left and right channels.

Power Output: 180W RMS @ 4Ω

RMS stands for Root Mean Square, representing continuous power. The unit delivers 180 watts when driving 4-ohm speakers. This rating helps you match the amp to your speaker impedance. Higher RMS values generally allow for cleaner sound at higher volumes. When shopping, compare this to other receivers to ensure your speakers can handle the output without distortion.

Peak Output: 1500W

Peak output indicates the maximum short-term power burst the amplifier can produce. This figure is much higher than the continuous RMS rating. It helps handle sudden loud sounds in movies or music. However, it does not reflect sustained performance. Use this number alongside RMS ratings to understand the full power capabilities of the unit.

Front Speaker Power: 45W × 2

Each front channel provides 45 watts of power. This output drives your main left and right speakers. It is sufficient for small to medium-sized rooms. You should check if your front speakers are efficient enough to utilize this power. Compare this per-channel output to other models to ensure balanced performance across your main audio channels.

AUDISHAKO HZ5800 Design and Build

The AUDISHAKO HZ5800 features a green finish that matches its five-mode LED display. According to the listing, the unit includes a remote control for operation from a distance. This allows you to adjust settings without leaving your seat. The front panel provides direct access to essential controls. You can use the knobs for quick adjustments while listening or singing. This layout keeps frequently used functions within easy reach during active use.

The receiver is designed for home theater use. It supports five channels plus a subwoofer output. You connect two front speakers, two surround speakers, one center channel, and a subwoofer. The power output is 180W RMS at 4Ω. This drives the front and subwoofer channels at 45W each. The surround and center channels receive 15W and 15W respectively. This distribution supports balanced audio for movies and music. The unit does not include HDMI inputs or Dolby decoding. You must rely on optical, coaxial, Bluetooth, USB, or SD connections for audio sources.

The design prioritizes functional connectivity over complex video processing. You can plug in up to three microphones for karaoke. Separate volume controls for each speaker channel let you balance the sound. You can adjust bass, midrange, and treble to suit your room. The green LED display shows the current mode. This straightforward approach suits users who want a dedicated audio hub for music and surround sound without video switching requirements.

Setup and everyday use guide

Setting up the AUDISHAKO HZ5800 requires connecting five full-range channels and one subwoofer. You must wire two front speakers, two surround speakers, one center channel, and a subwoofer to the appropriate terminals. The unit delivers 45W to the front speakers and subwoofer, with 15W per surround speaker and 15W for the center. This distribution supports a standard 5.1 home theater layout. You connect audio sources via Bluetooth, optical input, or coaxial input. The receiver also supports playback from USB drives and SD cards. FM radio tuning is available through the internal tuner. You cannot connect HDMI devices or stream via network protocols, as the listing specifies no HDMI input or Dolby decoding. Daily operation relies on the front panel knobs and the included remote. You adjust bass, midrange, and treble to match your room acoustics. Separate volume controls allow you to balance the left surround, right surround, center, and subwoofer levels independently. The green LED display shows five modes. For karaoke, you plug up to three compatible microphones into the dedicated inputs. You use separate controls to balance microphone volume against music and adjust echo and delay settings. This setup suits users who want a dedicated multi-speaker system with physical controls and basic digital inputs. It does not fit those needing modern streaming features or high-resolution decoding.

Before you buy this receiver

You need five speakers and a subwoofer for this 5.1-channel setup. The listing specifies 45W for front speakers and 15W for surrounds. Ensure your existing speakers can handle these levels. You must check your source devices carefully. This unit lacks HDMI inputs and Dolby decoding. You cannot connect modern streaming sticks directly. Use optical or coaxial connections for TVs. Bluetooth works for phone audio, but no streaming protocols are listed. You may need separate adapters for older devices. Keep the green LED display clear of dust. The remote helps adjust echo and delay for karaoke. Balance the subwoofer and center channel volumes manually. This model fits buyers who want basic home theater features. It suits those who do not need advanced decoding. It is less versatile than receivers with HDMI and streaming. Check your room size against the 180W RMS output. This power level is sufficient for small to medium spaces.

Check before you buy

• Verify speaker impedance matches the 4Ω requirement for safe operation
• Confirm your TV has optical or coaxial outputs for video
• Check if you need HDMI for modern gaming consoles
• Ensure you have three microphones for the karaoke feature

The product at a glance

1

AUDISHAKO 5.1-Channel Receiver with Bluetooth

Best for: home theater setups with multi-mic karaoke

Channels

5.1

Power Output

180W RMS at 4Ω

Connectivity

USB, Coaxial

Use

Home Theater, Karaoke

Inputs

Optical

Media Playback

SD Card

View on Amazon: AUDISHAKO 5.1-Channel Receiver with Bluetooth Affiliate link

This 5.1-channel home theater receiver delivers 180W RMS total power at 4 ohms, dividing 45W across the front and subwoofer channels and 15W to the center and surround speakers. It includes three microphone inputs with independent echo controls, alongside optical, coaxial, and Bluetooth inputs. It suits you if you want a multi-channel setup for movies and multi-person karaoke.

Pros

• 180W RMS output at 4 ohms across 5.1 channels
• Three microphone jacks with dedicated echo and delay adjustments
• Optical, coaxial, Bluetooth, USB, SD, and FM playback options
• Individual volume dials for surround, center, and subwoofer channels

Cons

• Surround and center outputs limited to 15W each
• 180W RMS total power rated at 4 ohms

Good fit if

• You host karaoke sessions that need three microphone inputs simultaneously.
• You balance surround, center, and subwoofer channels using front-panel dials.

Skip if

• You need more than 15W per channel for surround and center speakers.
• You want equal wattage distributed across all audio channels.

Verdict: AUDISHAKO 5.1-Channel Bluetooth Receiver fits home theater users who want three dedicated microphone inputs for karaoke alongside multi-channel audio balancing.

Specifications side by side

Frequently asked questions

See also

• audishako 5 1 channel stereo receivers alternatives
• best turntables under 150
• donner mamp8 5 2 channel stereo receiver review
• aida wireless doorbell 1 receiver review